Safety barrier - Safety grille
Chapter 05: Mounting the safety barriers
The safety grilles are supplied pre-installed with the cover. For retrofitting, please follow the
instructions below. The safety grilles come in two versions:
1. Folding to the rear - Grille installed directly onto the hinge side of the frame
Locking provided by chain on the grille, to be suspended from the hook on the lid.
2. Folding to the side - Installation on mounting tracks on the hinge side and locking side of
the frame. The grilles are inserted into these tracks. When opened they stand up on their
own and they can be removed at any time.
1. Loosen the screw
connection of the gas
2. Insert the grille and screw it to the connection points. Do
not tighten, screw must still be able to turn.
1. When retrofitting this type of grid, bolt
anchors must be set first. To do this, hold the
rails in the correct position and mark the
holes. Then mount the rails on the frame.
2. Insert grid
Status: 10-2021
Page 9 of 16
