Opening and closing the shaft cover
; beyond that you must open the
Chapter 06: Using the shaft cover
Emergency release (optional equipment):
To operate the emergency release from inside the structure (from below), the
activating lever must be pulled downwards. This disables the locking mechanism
function, and the lid can then be opened / or pushed upwards.
To close the cover, the locking bracket must be reinserted into the guide and the
lever moved back into its original position.
Opening the shaft cover from outside the structure (from above) is performed as
described on the previous page.
Attention!
- We advise that a combination of emergency release and safety
barriers such as safety grilles or guard rails is not sensible. After operating the
emergency release, it may potentially not be possible, or only possible with great
difficulty, for a fleeing person to open or push up the lid if this is obstructed by a
grille or a folded-up guard rail sitting in the frame.
Status: 10-2021
Page 12 of 16
