Hailo G60, Instructions For Use Manual

Page: 22 / 128

22
6. Instructions for assembly
6.4
B) Assembly of the cross bars
1. Ladder frame without castors.
Fixing the foot [11] to the cross bar.
Mount the cross bar [10] to the bar of the
ladder frame [17], [18], [19|.
2. Ladder frame with castors.
Fixing the foot [11] to the cross bar.
Fix the cross bar with castor set [13], [14], [15],
[16] to the bars of the other ladder frame [17],
[18], [19|.
A) Assembly of the horizontal and railing braces
B) Assembly of the diagonal braces
Advance note:
all braces of the scaffolding [2], [3], [4] are
secured to the ladder frame using the same locking
system. Observe the positioning of the braces (see
figure).
1. Swivel securing hooks [X] away.
2. Insert rubber plugs of the pre-assembled
locking system into the hollow space of the
ladder rungs.
3. Swivel securing hooks [X] away to secure the
brace to the ladder frame.
WARNING
Danger of severe injuries
in the event of a tipping over
In order to guarantee stability, the scaffolding
must only be used with the crossbars installed.
Assembly of the
multipurpose scaffolding
6.2
6.3
(See illustrations on page 123 - 127)
A) Preparing the work platform
Insert cover cap [6] and pre-assemble 2 clip bolt
sets [7], [8], [9] on the work platform (offset
diagonally).
A) Function of the safety joint
To adjust the ladder frame [1], release the safety
swivel joint [Y] from the locked position as shown
and swivel the top part of the ladder frame
upwards by 180°. Both parts of the ladder frame
engage again automatically.
B) Positioning of the
cross-bars / ladder frames
Arrange both ladder frames [1] such that the
safety joint[Y] points to the inside when in the
position for use. Both cross-bars [10] are mounted
to the ladder frames from the outside.
6.1 Advance note
A) = Scaffolding dimensions.
Maximum installation height of the
work platform = 2,33 m.
B) = Standing heights and working heights with
different mounting variants of the scaffold
C) = Standing heights, working heights and
dimensions when using the ladder frames as
stepladder or single ladder.
Technical data /
Mounting variants
Pre-assembly