Hailo 8050 Series, Instructions For Use Manual

Page: 17 / 112

- 17 -
en
6. Assembly and operation
(Illustrations for the assembly and operation, see page 5 .)
Setting up and storing the ladder:
1. When setting up the ladder pay attention to the entire
secured opening of both ladder parts. Lock the platform [F]
additionally by applying slight pressure with your hand.
2. For storage, lift the platform [F] and fold the ladder together.
Stepladders – art. no. 8050-xxx: To release, slide in the
platform locking [F-1] lifting platform [F] in the process and
fold the ladder completely together.
Use non-conductive ladders for unavoidable live electrical
work.
Do not use the ladder as a bridge.
Do not use the ladder as a bridge.
Do not move a ladder while standing on it.
For outdoor use caution to the wind.
Ladder for “professional”
and “non professional” use.
Do not step off the side of standing ladder onto
another surface.
Open the ladder fully before use.
Standing ladders shall not be used as a leaning
ladder unless it is designed to do so.
The multifunction tray or safety rail of the
stepladder may be loaded with maximum 10 kg.
The multifunction tray or safety rail
of the stepladder must not be used
as a sitting or a stepping surface.