21
XIII. Drying failure
Possible causes
1. The power cord is incorrectly plugged in the socket or the power source is in poor
contact.
2. The door is not tightly closed.
3. The knob of program controller is set on " ".
4. Drying time has not been set.
5. Malfunction of drying timer.
6. Malfunction of drying device
Troubleshooting
1. Check the plug and socket to make sure that they are properly connected.
2. Close the door tightly.
3. Set the knob of program controller on " ".
4. Set the drying time.
5. Replace the drying timer.
6. Check the drying device.
7. Whether the heating pipe for drying is in on-position.
8. Whether the electric motor for drying works normally.
9. Check if the plug of drying device is loose.
XIV. Drying failure
Possible causes
1. No drainage
2. The drying load is higher than the standard capacity (6.6lbs).
3. The drying time is too short.
4. Malfunction of feed unit of drying system
Troubleshooting
1. Check the drainage system.
2. Reduce the drying load to 6.6lbs or less.
3. Prolong the drying time to 20 minutes or more.
4. Check the feed unit of drying system.
5. Whether the faucet is opened.
6. Whether the water feeding is normal at the condenser.
7. Whether the flow regulator is choked.
