(ST :16~38
℃,
T
:
16~43
℃
)
A1 Temperature setting-
A2 Temperature
B Temperature display
C Lock
D Temperature running indicator
Function instruction
Start up
Plug in, the display screen is lit and unlocked. The temperature display B shows
the actual temperature of the cooler.
Display lock / unlock function
Temperature Setting
Power off memory
The default temperature of the refrigerator is
5℃ , and some products do
not have electronic temperature controller.
The product is subject to the actual model.
Electronic Control Panel
To unlock the cooler for temperature setting, press both A1 and A2 for 3 seconds
concurrently.
Under the unlocking state, press both A1 and A2 for 3 seconds concurrently, or
without pressing on any buttons within 30 seconds, the temperature setting will
be locked again and the lock icon will be illuminated.
When the display screen flashes F3, it indicates sensor failure. Kindly contact
after sales service for repair. Display screen will stop flashing error code F3
once the problem is solved.
Under the unlocking state, temperature can be adjusted by pressing on A1 to
reduce and A2 to increase and the range is within 0 to 8℃. If no action is taken
within 5 seconds, the set point will be stored automatically.
This product comes with a power off memory. It will work according to the
previous setting before power outage when turn on again.
The cooler should be placed horizontal and stable.
It should be removed from all packaging to reduce
vibration and noise. When unit is being moved, the
inclination angle should not be more than 45°.
Do not place the cooler under direct sunlight or at
a place where it will exposed to external heating
sources. Ambient temperature should not exceed
the climate type temperature on the nameplate.
Install the cooler in a good ventilation room to have
better cooling. A distance of 10cm between the wall
and cooler is required to ensure adequate ventilation.
Do not place the cooler where the temperature is
too low or not according to the temperate climate.
Never place the cooler at a humid area or where it
may be easily splashed by water. Clean and dry any
water splashes and stains with soft cloths immediately
to prevent rust and unit should place at shaded area
to avoid raining.
Avoid placing cooler near any acute corner angle
to avoid contact to the glass door.
Ambient environment
