Haier P42V6-A8K, Owner'S Manual

Page: 16 / 50

How to connect
1
. To get the best picture quality, adjust the PC
graphics card to (P42V6-A8K >800
2
. Use the TV`s D-SUB or DVI (Digital Visual
Interface) INPUT port for video connections,
depending on your PC connector.
If the graphic card on the PC does not output
analog and digital RGB simultaneously,
connect only one of either D-SU
r DVI IN to
display the PC on the TV.
If the graphic card on the PC does output
analog and digital RGB simultaneously, set the
TV to eithe
DVI; (the other mode is set
to Plug and Play automatically by the TV.)
3
. Then, make the corresponding audio
connection. If using a sound card, adjust the
PC sound as required.
How to use
1
. Turn on the PC and the TV.
2 . Turn on the display by pressing the POWER
button on the TV's remote control.
3
. Use TV/AV on the remote control to select
x600),60Hz.
IN
B IN o
r D-SUB or
D-
External Equipment Connections
PC connection
Resolution
Line
frequency
(Khz)
VGA SVGA
XGA
640*480 800*600 1024*768
Mode
Resolution
Note : All above listed are subject to VESA
Criteria.
Frame
frequency
(Hz)
31.5KHz
37.9KHz
48.4KHz
60Hz 60Hz 60Hz
SUB or DVI source.
4
. Check the image on your TV. There may
be noise associated with the resolution,
vertical pattern, contrast or brightness in
PC mode. If noise is present, change the
PC mode to another resolution, change
the refresh rate to another rate or adjust
the brightness and contrast on the menu
until the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
NOTES:
1
Use a DVI cable.
2 Avoid keeping a fixed image on the TV's
screen for a long period of time. The fixed
image may become permanently
imprinted on the screen.
3 The synchronization input form for
Horizontal and Vertical frequencies is
separate.
L
R
ANT.
DVI IN
D-SUB IN
AUDIO IN
12