Haier P42V6-A8K, Owner'S Manual

Page: 31 / 50

Clock and on/off time setting
2
Press VOL+ buttons to enter, press VOL - buttons to
select hour position of Clock and press repeatedly to
set the value of hour; press VOL + buttons to select
the minutes position of Clock and press repeatedly
set the value of minute.
1
Press the MENU button and CH+/- button, till the
Timer menu display on the screen.
A
B
C
Clock -- --
OFF Time -- --
ON Time -- --
ON Prog. ---
Remind Time -- --
Remind Prog. -- --
Timer
Enter
Timer menu
RIGHT
DISPLAY
CH+
CH-
VOL-
VOL+
MENU
SSM PSM
TV/AV MUTE
FAV.
-/--/--- USB
Q.VIEW SLEEP
POWER
UP LEFT
PREV. NEXT DOWN
PAUSE ENTER
SWAP EXIT
Indication will appear on the screen 10 seconds
prior to expiry of set time.
Suppose off-time is set, and indication is as follows:
Note : when the above indication appears on the screen, press
VOL+/- button to change the setting time.
OFF TIME 8 S
You can set the On/Off timers so that the set will :
Switch on automatically and tune to the channel of your choice at the time
you select.
Switch off automatically at the time you select.
NOTE:
1.
After a power failure or
disconnection of the
power, the timer settings
will be lost. In this case,
reset the present time.
2 . Before activating ON Time
setup, the Clock must be
correcting calibrated,
otherwise, the timer option
cannot be adjusted.
If to cancel the current
time setting, all the previously
timer setting will also be
inactivated.
Note :
Timer menu is in no
presence in D-SUB
and DVI modes;
3
and press CH+/- buttons to select OFF Time/ON
Time, press VOL - buttons to select hour position and
press repeatedly to set the value of hour; press VOL +
buttons to select the minutes position and press
repeatedly set the value of minute.
4
press CH+/- buttons to select ON Prog, press VOL
+/- buttons to set the desired channel.
27