background image

1

2

3

4

5

6

7

8

9

0

CH+

CH-

VOL-

VOL+

MENU

21

TELETEXT FUNCTION

Teletext 

Teletext functions

Use the CH+/- buttons to browse next or previous page.

    

   

     Volume adjustment
     Mute function  

To select "Teletext" press the Teletext button on the remote
control. To switch off Teletext, press the button again.  
"Note all menu functions are not available in Teletext 
mode".  Only a few direct  button control functions are 
available in TELETEXT mode, they are:

To select a Teletext page, enter the page number using 
the numeric key pad on the remote control, or use the 
CH+/- buttons, or the coloured Fast text buttons.

To view the TV picture while in Text mode press      the        
button, this will superimpose the Teletext data on top of 
the TV picture. Press this button again to return to Full 
text.

INDEX

Press the CH.LIST button to go to the index page of teletext.

Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who 
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).

 Note: The teletext buttons could be working even if there is no teletext signal, but there
is no teletext display.

Mix mode

Page number entering

Page up/down

CHILD LOCK SETTING

Using this function can control the image, volume, 
channel and so on. Pressing H.LOCK on the remote
control, it will display input password menu, the original 
password is 0000, after inputting, it will enter the child 
lock setting menu.
1.Press CH+/- button to select the first item, press 
   VOL+/- button to select signal input source, pressing 
    H.LOCK button can  open or lock the selected source.
2.Press CH+/- button to select CHANNEL item, press 
   CH+/- button to select digit, press VOL+/- button to
   change channel number, the channel range is 0-100,
   pressing H.LOCK button can  open or lock the selected 
   channel.
3.Press CH+/- button to select TV SEARCH item, 
   pressing VOL+/- button  can  open or lock the TV 
   search function. 
4.Press CH+/- button to select KEYPAD item, pressing 
    VOL+/- button  can  open or lock keypad function, if
    locked this item, the control panel will not work.
5.Press CH+/- button to select REMOTE item, pressing 
    VOL+/- button  can  open or lock remote function, if
    locked this item, the buttons will not work except 
    H.LOCK and power switch.
6.Press CH+/- button to select CLEAR ALL  item, press
   VOL+/- button to unlock all the locked items.
7.Press CH+/- button to select CHANGE PASSWORD 
   item, press VOL+/- button to enter INPUT NEW 
   PASSWORD menu, first input new password and then 
   confirm the new password,  the password will be changed.
8.Press CH+/- button to select VOLUME-LIM item, press
   VOL+/- button to set the maximum volume, the limited
   range is 10-100.
9.Press CH+/- button to select PW. CHANNEL item, press
   VOL+/- button to set channel number, this channel is the 
   pw.channel number, if select OFF, it will turn off the 
   pw.channel lock function.
10.BUS item is not available.
After setting the locked item, it will enter the locked item, 
for example, the video1 doesn’t display the image, it will 
display LOCKED, pressing H.LOCK button and input the
password can open the current channel in the current status.
  

20

O              TV            UNLOCK
CHANNEL   000      UNLOCK
OTV SEARCH         UNLOCK
OKEYPAD               UNLOCK
OREMOTE              UNLOCK
OCLEAR ALL
OCHANGE PASSWORD               
OVOLUME-LIM               100
OPW.CHANNEL              OFF
OBUS                                 ON

             INPUT NEW
PASSWORD
               * * * *

             INPUT NEW
PASSWORD
               * * * *
               * * * *

             INPUT NEW
PASSWORD
               * * * *
 AGAIN * * * *

Summary of Contents for L42A8A-A1
















Reviews: