Haier JC-112G, Service Manual

Page: 9 / 24

８
Back…………..2”(50mm)
z
Do not over fill your wine cooler for proper internal air circulation.
INSTALLATION AND ACCESSORY PARTS
Electrical Requirement
z
Make sure there is a suitable power Outlet(220-230V)with proper grounding to
power the wine cooler.
z
Avoid the use of three plug adapters or cutting off the third grounding in order
to accommodate a two plug outlet ,This is a dangerous practice since it
provides no effective grounding for the wine cooler and may result in shock
hazard.
Install Limitations
z
Do not install your wine cooler in any location not properly insulated or heated
e.g. garage etc, Your wine cooler was not designed to operate in temperature
settings below 13
℃
Centigrade.
z
Select a suitable location for the wine cooler on a hard even surface away
from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc, Any floor unevenness should be corrected with the leveling
legs located on the front and rear bottom corners of the wine cooler.
z
Your wine cooler is designed for free-standing installation only, It is not
designed for built-in application.
Electronic Controlled Units: See fig.#1
Once you have plugged the unit into an electrical outlet, Let the unit run for at
least 30 minutes to acclimate itself before making any adjustments, during this