General
Controls
The main functions of this system can be operated by the controls on the top panel of the main
unit, or by the buttons on the remote control. If a specific function can only be operated by the
remote control, this will be clearly indicated in the instructions.
When operating this system with the remote control, make sure that the IR (Infrared) transmitter
on the front of the remote control is pointed at the remote sensor on the front panel of the main
unit.
The effective operating range of the remote control is approximately 20 feet. Please note that
bright sunlight or room lighting may interfere with the remote control operation. If the remote
control is not operating properly, try reducing the brightness of the room or moving closer to the
main unit. If this does not solve the problem, it may be time to change the remote control battery.
OPERATING INSTRUCTIONS
9
FUNCTION
CONTROLS
Docking your iPod , iPhone , iPad
Gently dock your
iPod , iPhone , iPad to the 30 pin connector on the front of the unit. Do not
force. If you have
not already downloaded the free AppClockRadio
from the
iTunes App Store, you will see the following message on your iPad / iPhone or iPod Touch
display: “This accessory requires an application that you do not have installed.” The purpose
of this
message is to advise you that you must download the AppClockRadio
to
enjoy
the enhanced features of the IPD-1
. However, your iPod , iPhone , iPad
will work
properly with the IPD-1
even without the AppClockRadio
installed.
(VIEW XL)
(VIEW XL)
57
57
(VIEW XL)
IMPORTANT NOTES:
When
you
dock
an iPod
,
iPhone
or
iPad
there
may
be
a
slight
delay before the system
recognizes the device and the main menu is displayed. This is because the system and the
docked device must go through an ‘Authentication Process’ before the docked device can
accept any commands. THIS IS NORMAL AND IS NOT AN INDICATION OF ANY PROBLEM
WITH YOUR SYSTEM.
The
iPod
Classic
,
iPod
(
4th
and
5th
generation
)
are not supported charging function
with this unit.(This charging operation is not allowed by Apple)
Volume Controls
To increase or decrease the system volume, press the
VOLUME
or button on the
remote control or on the front panel.
ENGLISH