20
VIDEO OPERATION
Connecting the Video Cord to View a Video/Picture from iPod , iPhone , iPad
(not supplied)
The below diagram show the connection options available.
NOTE:
Consult your iPod documentation for details on how to enable video output on you
model of iP
o
d , iPhone , iP
a
d.
Use the HDMI cable
to connect this jack to the HDMI jack on your television for the best
picture.
If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically
a maximum of 10 seconds later.
Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
Connecting to a TV with HDMI Jack
1, Using the HDMI cable connect the HDMI OUT terminal
to the rear of the unit and
to the HDMI IN terminal of your TV.
2, Press the input selector on your TV remote control to
switch
to
the
HDMI signal from the unit appears on your TV screen.
**
If there is noise or lines on the screen, please check the HDMI cable.
Remarks:
need to change the output setting to TV output.
• Press the
VIDEO OUT
button on the remote control to escape the current video playback,
then press
ENTER
or Play(iPad) to resume on TV screen.
NOTES:
• Due to the software used in iPod Classic
and iPod
Nano 3G, to change the video to video
output mode you will need to press the
MENU
button to escape the
current video playback, then press
ENTER
to resume.
• HDMI video output to television is supported by iPod nano (3rd, 4th and 5th
generation), iPod touch (2nd generation), and iPod classic at 480p or 576p resolution;
and by iPod touch (1st generation), iPhone, iPhone 3G, iPhone 3GS, iPhone 4, and iPad
at 480p or 576p resolution.
• When you have your iPod outputting video and the unit connected to your TV, you may
Video play on iP d , iPhone , iP d
o
a
TV out with
out
HDMI
TV
To
input of TV
HDMI
Cable (not supplied)
FM ANT.
AUX IN
DC IN 8.5V
HDMI
FM ANT.
AUX IN
DC IN 8.5V
HDMI
ENGLISH