Haier HWM60-20B User Manual Download Page 11

9

Liquid whitener
inlet

Control panel seat

See to the manual of softener for the usage and dosage.

Do not leave the softener for long period after adding
 it into the box. Otherwise it may be solidified and block
 the inlet.
As the softener is easy to solidify, please clean the box
 frequently.(You shall clean each time you use reserve
function.)

When adding softener into softener inlet of washing
powder box, not that it shall not exceed the lower side
of the water cap.

The capacity of washing and spinning of the 
machine refer to the largest weight of the 
standard laundries under dry condition  that 
can be washed or spinned in one time. One
time washing quantity shall be lower than the 
rated capacity.
The thickness, size, type of the cloth will inf-
luence the actual washing capacity. It is sui-
table for one time washing to put in reasona-
ble amount of laundries and the laundries can
 be turned round in washing.
Do not select "High"water level for laundries
small than 1.0kg,  so  as  to avoid  splashing 
of water.

Put in the laundries

Usage of the detergent

Access for detergent

Access for softener

Washing powder box

Put the washing powder and softener
 into the detergent box directly as
 indicated in the left figure.
After that, please close the detergent
 box. Refer to the following table for
 the usage of the detergent: The standard
dosage of the detergent and the water
quantity

How to use the washing 

powder

How to use the whitener

Fill water to decided level. Dilute the whitener
with container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with color or
pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.

If you use fuzzy program and reserve
 washing please first put the washing
powder into the washing powder box.

Direct dissolved in the machine(

Not app-

licable for fuzzy program and reserve washing)

1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds 
to dissolve it completely.
3.Put in the laundries. Select 
suitable water level.

The instant dissolving of the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the powder while stirring to fully dissolve it.

Put in the proper quantities detergent according
 to the water level and the laundries quantities .

It is suggested not to use high sudsing detergent.

Washing powder with poor quality or long time
storage maybe caked. Please pay attention to
cleaning the detergent box in time

The super quick program, it is suggested to adopt
 liquid detergent instead of washing powder to
guarantee the washing effect.

How to use the softener

Summary of Contents for HWM60-20B



















Reviews: