Operation
15
Power
Power
Program
Program
Start/Pause
Start/Pause
DIY
DIY
Process
Process
2
1
You can use this function to clean the inner tub and outer tub of
washing machine.
Spin alternately, and the total soak time is 10hours to make sure better
clean effect.
Do not put clothes during tub clean process.
“Tub clean” function
Tub
clean
Cycle completed
When the machine has completed the selected/current wash cycle an audible alarm
will sound and the machine will automatically switch off .
Button Operation and Descriptions
Press
Press
3.Press the button to select corresponding process.
4.Press the button adjust water level,wash time,rinse
5.Press the button,close the top lid.
i
i
times and other parameters.
After the power is turned on, the "commonly used" program is automatically set,
select other automatic programs, and press the "Program" button until the
See "Program" button on page 13. If you want to
"Program" button, the indicator
corresponding indicator lights up.
choose the program P1-PA (see page 14), Press the
light stays at P1-PA, and the display screen switches from P1 to PA .