Operation
Explanation of buttons
Press Power button,set the desired washing program,after setting, press Start/Pause
button, then press Process button and Set button at the same time and hold for
3 seconds, The digitron displays “CL”, The child lock light goes on,the child lock will
activate. All of the buttons are locked and have no function.
Child Lock function
Release the child lock function: In the process of program running, Press Process
button and Set button at the same time and hold for more than 3 seconds. After three
beep sound,the child lock function is released.The child lock light goes out.
NOTE
：
If you open the lid when the “child lock”activate,digital tube display “E2”and
beep,you need close the lid and press the “Start/Pause”to cancel,or washing machine
will drain after 10 seconds.
Indicator display
Off
On:Indicates the program is about to run and indicates the selected program and
options
Flashing:Indicates the program is running and indicates the selected cycle and
options
.
11
The function is intended for children’s safety and prevent children from accidental
changes to washing programs.
Normal
Shirts
Power
Start/Pause
Process
Spin
Delicate
Quick
P1-PA
Program
P1 Heavy
P2 Sports
P4 Silk
P5 Soak
P6 Wool
P7 Baby Care
P8 Synthetic
P9 Rinse+Spin
PA Air Dry
P3 Eco
DIY
:If the indicator is blinking, the water inlet is abnormal. Check whether the water inlet
valve is blocked, whether the faucet is open, and whether the water pressure is normal.
When the fault is rectified, press the Start/Pause button to resume the operation.
:After starting and running, the computer board detects the voltage. When the voltage
of the external network is abnormal, the voltage alarm lamp blinks. When the voltage
returns to normal, the alarm is released.