Usage of the detergent
The rated washing capacity refers to the largest dry
weight of a load that can be washed.
The thickness, size and type of clothes will have impact
on the actual capacity.
Do not select the higher water level “4” for clothes weight
less than 1.0kg, to avoid splashing of water.
It is recommended that low suds/high efficiency washing
detergent should be used.
Operation
Load your laundry
10
It is suggested to dissolve powder detergent before adding to the tub,see as below: It is
suggested.
1.Prepare warm water (<35°C) in a container.
2.Add washing powder detergent,stirring to dissolve completely.
It is recommended that washing powder detergent is dissolved with water and then directly
put into the washing machine:
1.Add some water (select the“1” water level)
2.Add washing powder detergent. Run for about 30 seconds to fully dissolve the detergent.
Then press the“Start/Pause” button to pause the wash cycle.
3.Load laundry. Select suitable water level. Press the “Start/Pause” button again to
recommence washing cycle.
Old or poor quality washing powder may cause scaling in tub or detergent dispenser.
Clean the detergent box periodically to ensure washing power is evenly distributed and
avoid any detergent build up.
When water pressure is too low, it is possible that washing powder cannot be washed
away effectively,and washing powder would be agglomerated after a period of time.
Please clean the detergent box in time. It is recommended to pour the washing powder
into the basket directly.
washing powder inlet