English
8
INSTALLATION INSTRUCTIONS
Tools and Materials Required
You will need to have the following tools
to help you in the installation of your washer:
• Scissors
• Tape Measure
• Standard Screwdriver
• Gloves
• Pliers
• Level
• Wrench
Accessories Supplied
Quantity
1. Hot & Cold Water Inlet Hoses
2
2. Pressure Regulator
2
(Attached to Hot & Cold Water Inlet Hoses)
3. Flat Water Inlet Hose Washers
4
(Installed in each end of water inlet hoses)
4. Use & Care Guide (Not Shown)
1
5. Plastic Plugs to cover
3
transportation bolt holes
6. Drain hose support bracket
1
1
3
4
5
6
USER MANUAL
2
Warning – Risk of Fire
• Washer/Dryer Combo installation must be performed by a qualified installer.
• Install the Combo according to the manufacturer’s instructions and local codes.
• To reduce the risk of severe injury or death, follow all installation instructions.
• Save these instructions
!