3
4
2
5
6
7
8
1
9
11
12
13
English
OPERATIONAL INSTRUCTIONS
Warning
- To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Functions
Control Panel
1. Cycle Selector
To set a desired wash program, turning the knob will light the cycle selected on
the control panel. Wash cycles are: Cotton, Synthetic, Wool, Silk, Quick & Sport.
Once selected you could press the "Start/Pause" button to start operation.
2. Start/Pause Button
After a cycle, options, spin speed, temperature and dry cycle is selected, press this
button to begin wash. During a wash cycle, press this button to pause operation.
Press again to resume operation. If dry cycle is selected, the wash load will go into
drying program after the wash is done.
3. Spin Speed Selection
By pressing this button, the required spinning speed can be selected. You could
choose from Max; High; Medium; Low to No Spin.
The maximum speed will vary when a different program is selected.
4. Temperature Button
Press button to select wash/rinse temperature. Selection choice is hot/cold;
warm/warm; warm/cold; cold/cold. The wash/rinse temperature will vary when a
different program is selected.
5. Drying Button
To start the dry cycle immediately after the wash cycle, press this button. An indicator
will light up showing its activation. When the unit goes in the dry mode the light will
flash. To cancel the program press the Start/Pause button before the cycle is complete.
Pressing Drying button again will cancel the dry program and turn off the light.
NOTE: Drying cycle is not available in all wash cycles.
