English
14
6. Extra Rinse Button
Press this button to add an additional rinse cycle to your wash load. A light on the
display screen will alert you that the option has been activated. Before the wash
cycle goes in the softening mode an additional rinse cycle will be added.
7. Prewash
Press this button to activate the Pre-Wash cycle. The indicator light will light up.
Once the wash cycle starts it will first go in the Pre-wash mode and then in the regu-
lar wash cycle. During this time the Pre-Wash display light will blink and water will
inflow in the 1st compartment of the detergent dispenser. At the end of the cycle the
display light will turn off.
8. Delay Start
To select, press the "Delay" function button. The wash cycle will begin at a later time of
your choosing. The cycle start will be delayed by 1 hour each time you press the but-
ton, to a maximum of 24 hours. After the display shows 24:00, pressing the button one
more time will make the display show 00:00. Now you can cancel the delay function
without powering off the combo. When selected, the delay icon will light up and will
only shut off when the cycle commences. The display shows delay time in hours. Once
the selected delay time is reached the machine will START.
9. LCD Display
Shows wash cycle chosen, dry cycle chosen, remaining wash/dry or delay time, spin
speed and temperature selection. Indicator light showing delay, prewash, extra rinse of
drying will also be displayed. Door lock and child lock functions will be lit when activated.
10. Detergent Distributor
If prewash cycle is chosen, add detergent in the
1st compartment.
Regular washing detergent is to be filled in the
2nd compartment.
Fabric softner if used should be filled in compartment 3
11. Door Light
A lock light will illuminate when the door is locked.
12. Child Lock Indicators
When child lock is activated this indicator will light up. Once the combo is running,
press "Delay" and "Start/Pause" at the same time for 3 seconds. This will activate
the feature. The LCD display will show "Safe On". Now the selected cycles cannot
accidentally be changed by anyone. To cancel press the "Delay" and the "Start/
Pause" again for 3 seconds.
2
3
1
