Haier HW90-B14636, User Manual, Page: 10 / 100

3-Control panel
GB
10
3.5.4 Function button“Extra rinse“
Press this button (Fig. 3-10) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin.
●
By pressing the button several times one to three ad-
ditional cycles can be selected. They appear in the dis-
play with

/

/

.
3.5.5 Function “Speed up“
T
●
his function saves time and energy. Preferable if laun-
dry is slightly soiled. Press simultaneously button “Extra
rinse“ and ”Delay” (Fig. 3-11) for about 3 seconds
t
●
o activate the “Speed up” function;  is dis-
played. This function is not available in all programmes
(see PROGRAMMES).
3.7 “Start/Pause
●
“ button
Press this button (Fig. 3-13) gently to start or inter
-
rupt the currently displayed programme. During pro
-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking.
3.6 “Delay” button
Press this button (Fig. 3-12) to start the programme
with a delay. End time delay could be increased in steps

:

means end of programme cycle will be in 6 hours
and 30 minutes. Press “Start/Pause” button to activate
the time delay. It is not applicable to programme SPIN.
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3.8 Child lock
Press button “Temp.“ and ”Steam” (Fig. 3-14) for 3
se
●
conds simultaneously to block all panel elements
against activation. For unlocking please press again
the two buttons.
The display shows

(Fig. 3-15) if a button will be
pressed, when the child lock is activated. The change
is not running.
3-15
Extra rinse
3-10
Delay
Extra rinse
Speed up
3-11
Delay
3-12
Start/Pause
3-13
3-14 Temp Speed Steam
Steam
3-9
If “Temp.” button is pushed the “Steam” function will be
deactivated.You can activate “Steam” function only bef-
ore to start any programme. You cannot activate “Steam”
-
function while the appliance is already executing a programme.