* Warning!
Code
Fb
: Water-overflow protection is placed on deepest part of appliance. In case of leackage
all functions will be shut down automatically except drain pump which will be activated for safety
reasons.
21
Troubleshooting
Problem
Cause
Solution
Washing machine fails
to operate.
Programme is not yet started.
Door is not properly closed.
Machine has not been switched on
Power failure.
Check programme and start it.
Close the door properly.
Switch the machine on.
Check power supply.
Washing machine
will not be filled with
water.
No water.
Inlet hose is kniked.
Inlet hose filter is blocked.
Water pressure is less than
0,03 MPa.
Door is not properly closed
Water supply failure
Check water tap
.
Check inlet hose.
Unblock inlet hose filter.
Check water pressure.
Close the door properly.
Ensure the water supply
Machine is draining
while being filled
Height of drain hose is below
80 cm.
Drain hose end could reach into
water.
Make sure that drain hose is
properly installed.
Make sure the drain hose is
not in water
Drainage failure
Drain hose is blocked
Pump filter is blocked
Drain hose end is higher than
100 cm above floor leve
l
Unblock drain hose.
Clean pump filter.
Make sure that drain hose is
properly installed
Strong vibration while
spinning
Not all transportation bolts have
been removed.
Appliance has no solid position.
Machine load is not correct.
Remove all transportation
bolts.
Ensure solid ground and a
evelled position.
Check load weight and balance.
Code
Cause
Solution
FC
Electronic control - error.
Contact the After sales service.
Unb
Unbalanced load - error.
Check and balance laundry load in the drum.
Reduce the load.
Troubleshooting without display code
