Adjusting the feet
Adjust all feets to achieve a complete level position.This will
minimize vibrations and thus noise during use. It will also
reduce wear and tear.We recommend to use a spirit level
for adjustment. Floor should be as stable and flat as possi-
ble.
24
Installation
Drain hose
Drainage could be installed in different ways. Nevertheless,
level of drain hose has to reach at one point 80-100 cm.
Do not twist, kink or jam the drain hose. If possible keep
always drain hose fixed to the clip at the appliance back.
1. Drain hose to sink
Use the drain hose bracket to keep drain hose end
retained and out of any water level.
Fix the bracket sufficiently to avoid dropping down
due to operational movements.
2. Drain hose to sink connection
The connection to the spigot of the water trap assebly
below the sink must be secure. Ensure a proper
height above ground to avoid drainage problems or
self-syphoning.
80 - 100 cm
3. Drain hose to waste water connection
Use the drain hose bracket to keep drain hose end
retained.
Fix the bracket sufficiently to avoid dropping down due
to operational movements.
Warning!
The drain hose should not be submerged in water and should be
securely fixed and leak-free. If the drain hose is placed on the
ground or if the pipe is at a height of less than 80cm, the washing
machine will continuously drain while being filled (self-siphoning).
Drain hose is not to be extended. If necessary contact after sales
service.
