background image

09

Before use

F

¬delay Button 

Touch this button lightly, the washing machine will start operation after a period of time 
and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this 
button increases a half hour. After the button is set, press the Start/Pause button to start 
countdown of the set time (the time is displayed on the screen until the program ends).

Note:The delay time must be longer than the program time;otherwise,the 
washing machine will start  the wash program directly.

g

¬ detergent 
distribution drawer

_Open the drawer, three compartments can be 
seen:
Compartment 1: Prewash detergent
Compartment 2: detergent for programs 1 to 8.
Compartment 3: Softener, conditioning agent, perfume, etc.

H

¬display

_Information as remaining wash time and error messages will be shown here. 

Note: After power is switched on, the display will go on and the remaining 
wash time decreases. As the water pressure and temperature may differ, the 
remaining time maybe adjusted accordingly. when the laundry is not balanced 
during spinning, the time may be automatically prolonged. These are normal 
phenomena.

I

Intense button

If the laundry is heavily soiled, press this button before starting the program. When the button is 

pressed, the washing time increases.

J

Extra rinse button 

   Press this button, the washing machine will perform additional rinses. Press the button once to 

select one additional rinse. The display will show"P-1". Press the button repeatedly and the screen 

will display "P-2''or "P-3'', indicating two or three additional selected rinses. The "extra rinse 

light" is activated and flashes during the performance. "P-1/2/3" is displayed alternating with 
the remaining time. The light turns off and the display disappears when the extra rinse ends.

Note:Select this function when programe 1-9  is selected.

K

Rinse hold

   Touch this button lightly,the indicator will go on.When the washing machine is at the last rinsing 

operation,it will not drain but to start a soaking cycle.If you want to spin the laundry,press this 

button or the “start/pause”button again,the indicator will go off and operation will resume.

Note:Select this function when “Prewash,Cotton,Synthetic,Mix,Sport”Programmes are selected. 

 

2

1

3

Summary of Contents for HW60-1201-U





















Reviews: