background image

16

1.

2.

1.

2.

maintenance

cleAning & cAre

AfTER wAShINg

Turn off the water supply and pull out electricity plug after each wash. 
Open the washer door to prevent formation of moisture and odours. If 
the washing machine is left idle for a long period, drain the water in 
the machine and replace the drain hose.

CLEANINg ThE DETERgENT DRAwER

Clean the detergent distribution drawer regularly.

Swing out the drawer, flush it clean with water and then replace it.

CLEANINg ThE MAChINE

Unplug the machine during cleaning and maintenance. Use a soft cloth 
dampened with soap liquid to clean the machine case and rubber components. do not use organic chemicals or corrosive solvents.

CLEANINg ThE fILTER

Clean the filter once a month:

1. Open the bottom cover. 

2.Remove the filter by turning counterclockwise.

3.Flush the filter clean with running water.

4.Replace the filter by turning clockwise and  
remount the cover.

Caution:

1.The filter must be in place, or it may lead to leakage.

2.Place a container under the drain pump filter, to collect 

any excess water that may come out of the drain pump 

when the filter is removed. 

3.

2.

4.

1.

Summary of Contents for HW60-1201-U





















Reviews: