3-Control panel
EN
10
3.5.3 “Steam“ button
This function (Fig. 3-9) is available on cycles of Cot-
ton, synthetic, Babycare, Mix. When it is selected,
temperature function turns to be unselectable. Icon
will be lighted when above cycles are selected.
3-12
Steam
3-9
3-10
Note: Factory settings
To get best results in each programme Haier has well de
fi
ned speci
fi
c default settings.
If there is no special requirement default settings are recommended.
Note: Nightwash
Max. speed can be setted is 800 rpm as you add Nightwash to a programme. Easy Iron
is the default setting of Nightwash. Nightwash will be cancelled if Easy Iron is cancelled.
3.5.5-Function button “ “
This function (Fig. 3-11) intensi
fi
es di
ff
erent washing
time. The “i-time”can’t operate in single washing
function, washing spin function and easy self-cleaning.
3.5.1-Function button “Delay“
Press this button (Fig. 3-7) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0,5-24h (add time to the original
programme time). For example display o
ff
6:30 means end of programme cycle will be in 6 hours
and 30 minutes. Touch “Start/Pause” button to activate
the time delay. It is not applicable to programme
“
Spin
“
.
3.5.4-“Function“ button
Press this button (Fig.3-10) to choose special features.
The symbols are explained below.
3.5.2-“Nightwash“ button
Press this button (Fig. 3-8) to select Nightwash
function to achieve better performance at night. All
the acoustic signal will be turned o
ff
, except for failure
signal. A 12 hour dispersing of laundry load is added to
the programme as 1 minute left..
3-7
3-8
Delay
Delay
8
3-11
I-time
Easy Iron
Allergen
Intense
