9-Troubleshooting
GB
24
-
ance, disconnect the power supply and contact the customer service.
9.4 In case of power failure
The current programme and its setting will be saved.
When power supply is restored operation will be re
-
sumed.
In case of power failure during programme run door
opening is mechanically blocked. If the laundry is to
be removed, the water level must not be visible in the
glass door. - Danger of scalding!
▶
Lower the water level according to step 1 to 6 of
chapter CARE AN CLEANING (PUMP FILTER).
▶
Pull lever (A) beneath service
fl
ap (Fig. 9-4) until
door is unlocked by a gentle click.
▶
Fix all parts and close the service
fl
ap.
A
9-4
Note: Foam formation
If too much foam is inspected during spin cycle, motor stops and drain pump will be ac
-
tivated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends
without spinning.
Problem
Cause
Solution
Automatic adjust
-
ment of washing
time.
•
Washing programme duration will
be adjusted.
•
This is normal and doesn‘t af
-
fect functionality.
Spinning fails.
•
Unbalance of laundry.
•
Check machine load and laun
-
dry and run a spinning pro
-
gramme again
.
Unsatisfactory wash
-
ing result.
•
The selected wash program was not a-
ppropriate for how dirty the laundry was.
•
Select an other programme.
•
-
cient.
•
Choose the detergent accord
-
ing to the degree of pollution
and according. to manufacturer
•
Maximum load has been exceeded.
•
Reduce loading.
•
Laundry was unevenly distributed
in the drum.
•
Loose the laundry.
Washing powder
residues are on the
laundry.
•
Insoluble particles of detergent can
remain as white spots on the laun
-
dry.
•
Perform extra rinse.
•
Try to brush the points from the
dry laundry.
•
Choose an other detergent.
Laundry has grey
patches.
•
Caused by fats such as oils, creams
or ointments.
•
Pretreat the laundry with a spe
-
cial cleaner.
