29
3. Setting
Tap “SETTING” on the interface of Picture 6 to enter the setting interface, shown in Picture 17.
Picture 17
Picture 18
Picture 19
1) General setting
You can change the Backlight brightness, Screensaver time, and Main/Sub controller switch by taping and dragging the
slider.
Note:
If the controller is set as a sub controller, the controller can only view the unit parameters and cannot change the unit
operation status.
You can set any one of the controllers in the system as Main controller but be sure there is only one main controller in the
system at any time. If you want to operate, please do this with the main controller.
2) Time setting
You can adjust the date & clock time by slide numbers up and down. After adjusting the clock parameters, click the
“CONFIRM” to confirm.
Operation instructions for controller
