background image

CLEANING

 

AND

 

MAINTENANCE

 

19

 

Removal

 

of

 

the

 

internal

 

glass

panel

Unscrew and unfasten the plastic latch that 
is in the corner at the top of the door. Next 
take out the glass from the second blocking        

mechanism and remove. After cleaning, 

sert and block the glass panel, and screw in 
the blocking mechanism.

 

Removal

 

of

 

the

 

internal

 

glass

 

panel

Regular

 

inspections

Besides keeping the cooker clean, you 
should:

 

  Carry out periodic inspections of the 

control elements and cooking units of the 
cooker. After the guarantee has expired you 
should have a technical inspection of the  
cooker carried out at a service centre 
at least once every two years.

 

  Fix any operational faults.

 

  Carry out periodical maintenance of the 

cooking units of the cooker. 

Caution

!

All repairs and regulatory activities should 
be carried out by the appropriate service 
centre or by an appropriately authorized 
fitter.  

20

Install door

OPERATION

 

IN

 

CASE

 

OF

 

EMERGENCY

In the event of an emergency, you should:

 

switch off all working units of the oven
Disconnect the mains plug 
Call the service centre

 

Some minor faults can be fixed by referring to the instructions given in the table below. 
Before calling the customer support centre or the service centre check the following  
points that are presented in the table. 

PROBLEM 

REASON 

ACTION 

1. 

The appliance does not work.

 

Break in power supply.

 

Check the household fuse box; if 

there is a blown fuse replace it 

with a new one

 

 

 

 

 

2. The oven lighting does not 

work.

The bulb is loose or damaged.

 

Tighten up  or replace the blown 

bulb   ( see   Cleaning  and 

 

Maintenance )   

If the cooker does not work

If the appliance does not operate check whether:

The power supply is on.

The fuse has blown/circuit breaker has tripped/main distribution switch has been turned off.
The temperture control has been set correct.
The main oven will not light has the clock been set.
Check your electric power supply earthing system.
This cooker must be earthed in doubt consult a qualified electrician.

If the appliance is still not operating after the above checks, please refer to section on how
to obtain sevice.

Performance characteristic when in use

When using your appliance for the first few times,  the odour and/or smoke may be 
emitted which is normal.
It is normal for the metal parts to produce noise when in use, this is due to expansion
and contraction .
When in use, steam may be produced which is normal and not a fault of the cooker.

At the end of cooking session,it is normal to have a momentary puff of steam when 
the oven door is opened. This should disperse in a few seconds.

If,whilst cooking, steam produced comes in to contact with cool surface’s on the outside 
of the appliance, it will condense and produce water droplets. This is quite normal and is 
not a fault.

Summary of Contents for HOR54B5M













Reviews: