18
Remove the blower plate.
1. Remove the screw that holds the blower plate to the microwave.
2. Lift off the blower plate. Set the screw aside.
b
a
a
Blower Plate
b
Back of Microwave
Attach the Mounting Plate to the Wall
NOTE: At least one wood screw must be used to attach the plate to a wall stud.
1. Remove the toggle wings from the bolts.
2. Insert the bolts into the mounting plate through the holes designated to go into
drywall and reattach the toggle wings onto each bolt.
3. Place the mounting plate against the wall and insert the toggle wings into the
holes in the wall to mount the plate.
NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the
mounting plate touch the bottom of the cabinet when pushed flush against the
wall and that the plate is properly centered under the cabinet.
b
a
d
c
f
e
a
Mounting Plate
b
Wall
c
Bolt End
d
Spacing for Toggles More
Than Wall Thickness
e
Toggle Wings
f
Toggle Bolt
