11
NOTE: Holes A and B are inside area E. If both A and B are not in a stud, locate a stud
somewhere in area E and draw a third circle that aligns with the stud. It is important
to use at least one wood screw mounted firmly in a stud to support the weight of the
microwave.
STEP 5 - DETERMINE INSTALLATION METHOD
IMPORTANT: This microwave oven is shipped assembled for Recirculating
Installation; however, it is designed for adaptation to the following methods of
ventilation. Select the ventilation method required for your installation and follow
the instructions specific to your method:
Method A - Outside Top Exhaust (Vertical Duct)
a
a
Adaptor in place for
Outside Top Exhaust
Method B - Outside Back Exhaust (Horizontal Duct)
a
a
Move adaptor to the back
for Outside Back Exhaust
Method C - Recirculating (Non-Vented, Ductless)
