8
6. Remove the screws from the mounting plate. Reinstall the screws into the holes
from where they were removed.
STEP 2 - LOCATE WALL STUDS
IMPORTANT: The microwave must be connected to at least one wall stud.
1. Find the studs, using one of the following methods:
Stud finder – a magnetic device that locates nails.
OR
Use a hammer to tap lightly across the mounting surface to find a solid sound. A
solid sound indicates a stud location.
2. After locating the stud(s), find the center by probing the wall with a small nail to
find the edges of the stud. Then place a mark halfway between the edges. The
center of any adjacent studs should be 16” (40.6 cm) or 24” (61 cm) from this
mark.
3. Draw a line down the center of the studs.
STEP 3 - PREPARE OVER-MICROWAVE CABINET
Overhead cabinet styles vary. Follow the instructions that apply for the cabinet
style in your home.
IMPORTANT: Disconnect power to outlet.
BENEATH FLAT-BOTTOM CABINET
1. Draw a vertical line on the wall at the center of the 30” (76.2 cm) wide space.
2. Tape the Mounting Plate/Rear Wall Template onto the wall matching the
centerline and touching the bottom of the cabinet.
16½"
a
a
Center Line
