Haier HM1200TX, Instructions For Installation And Operation Manual

Page: 7 / 22

Installation
Connect the drain hose to a drain duct (with
internal diameter of at least 4 cm.) or place it for
drainage into a sink or a tub, ensuring that there
are no kinks or bends. The free end must be at a
height of between 80 and 100 cm. Should it be
necessary to fix the end of the hose at a height of
less than 80 cm from the floor, the hose must be
fixed in the appropriate hook on the upper part of
the back panel (Fig.4) or use the supplied
support to fix the drain hose.(Fig.5)
Connection of
the Drain Hose
Fig.4
Fig.5
Insert stainless steel screen washers into end of
each supply hose and attach that end of supply
hose to your 3/4" water tap spigot.Be sure that
you match up cold water to "C" .
Note:Home Centers also have"Y" connectors
and "Couplings" which enable you to connect
the machine to your sinks faucet.
Connecting
WaterSupply