5
InsTaLLaTIon InsTRUCTIons
TooLs nEEDED
•
Pliers
•
Wrench
•
Flat-blade Screwdriver
•
Measuring Tape
•
Carpenter’s Level
PaRTs nEEDED (Not included)
•
New Water Hoses (2)
PaRTs sUPPLIED
•
Drain Hose Clamp
•
Drain Hose Hook
•
Drain Hose
•
User Manual
LoCaTIon REqUIREMEnTs
•
The washer must be installed on a solid floor to minimize vibration during the
spin cycle. A concrete floor is the best.
•
The floor should be level with maximum slope of 1” (25 mm) under entire washer.
•
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
•
Do not install on carpeting.
•
The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
•
Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and
cold connections on the washer.
•
A water heater must supply hot water with a temperature of at least 120°F
(49°C).
•
The water pressure should be between 20 and 100 psi (138 and 690 kPa).
WARNING
Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will
freeze and cause damage to the washer.
Summary of Contents for HLTW500axw
Page 2: ......
