10
Cable kit Packaging Components
Positive wire harness
X1
Negative wire harness
X1
PCS-RS485/CAN
communication cable X1
120ohm resistance
()
3.3
Installation steps
a.
Place the base
Take the control module and base module out of the carton and put them side by side.
The base module should be placed on a level
ground, parallel to the wall. The clearance to the wall should be 35mm (1.4inches).
b.
Install the angle bracket
Fixing screw
M5*12
4 pcs
Angle bracket
-
2 pcs
35mm (1.4inches)
