General information
Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited
as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to
the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
Information on comparability tests implemented in compliance with
AS/NZ
S 2007
Appliance loaded in accordance with standard specifications.
example of loaded dishwasher: See Fig 1 and 2
Capacity: 12 place settings
Comparability programme: Normal
Rinse-aid setting: 5
Detergent: 5g+25g
Height-adjustable top-basket must be inserted in the uppermost position.
When the programme is finished leave the door open 30° to improve the drying performance.
If the comparability tests do not comply fully with AS/NZS 2007, e.g., degree of soiling, type of dishes and
cutlery, etc., contact the appliance manufacturer before starting the test.
Fig.1
Fig.2
en
22
Summary of Contents for HDW12-SFE1 Series
Page 2: ......
