21
THREE-PIECE SILVERWARE BASKET
The silverware basket consists of three separate sections. For optimum loading
flexibility, the center section of the basket can be used either individually or joined
with one or both side sections as desired.
•
Lift handle to remove the silverware basket and set the basket on a counter or
table top.
•
Lift up on each side section to disengage the the center section from the
keyhole slots in the side sections.
•
Either replace the section(s) in the bottom rack and load the silverware, OR load
the silverware while the section(s) are on the countertop and then replace the
basket in the bottom rack.
a b
a
Keyhole Slots
b
Prongs
NOTES:
•
Load items with handles down, using the separators to prevent silverware from
nesting.
•
Place small items such as baby bottle caps, jar lids, corncob holders, etc. in the
section(s) with hinged cover(s). Close the cover to hold small items in place.
•
Unload or remove the basket before unloading the racks to avoid water drops
from falling on the silverware.
•
When handles are up, mix items in each section of the basket with some pointing
up and some down to avoid nesting. Spray cannot reach nested items.
IMPORTANT: Always load sharp items (knives, skewers, etc.) pointing down. Be sure
that nothing protrudes through bottom of the basket or rack that may block the
wash arm.