9
START UP GUIDE
IMPORTANT:
•
Properly dispose of/recycle all packing material.
•
Read this entire User Manual. You will find important safety information and
useful operating tips.
HOW YOUR DISHWASHER CLEANS
Your dishwasher cleans by spraying a mixture of hot water and detergent through
the spray arms against soiled surfaces.
The dishwasher fills with water covering the filter area. Water is then pumped
through the multiple filter and spray arms. Separated soil particles go down the
drain as the water is pumped out and replaced with clean water.
If the Sensor Wash system is activated, the number of water fills may vary with the
cycle being used.
USING YOUR NEW DISHWASHER
1. Load dishwasher. See “Dishwasher Loading.”
2. Add detergent . See “Proper Use of Detergent.”
3. Add rinse aid. See “Proper Use of Rinse Aid.”
4. Select desired CYCLE. See “Cycle and Option Charts.” The indicator light above
the Cycle will illuminate when selected.
5. Select desired OPTIONS. See “Cycle and Option Charts.” The indicator light
above the Option will illuminate when selected.
6. Turn on the hot water faucet nearest the dishwasher until water is hot. Turn
water off.
7. Press the Start/Cancel button.
8. Close door firmly to latch.
NOTE: The dishwasher is programmed to remember the last cycle so you do not
have to reset each time. To start the dishwasher using the same cycle and options
selected on the previous wash, just press the Start/Cancel button, and then close
the door firmly to latch.
