GB
Care and cleaning
23
50
Clean the machine
▶
Use a soft cloth with soap liquid to clean the ma
-
chine case and rubber components (fig.: 50).
▶
Do not use organic chemicals or corrosive sol
-
vents.
Notice
During the drying, moisture may accumulate between windows and seal. It does not af
-
fect the function of the dryer.
Clean the front of the heat exchanger
Approximately all 10 drying cycles the front of the
heat exchanger should be cleaned from fluff by using
a sponge or vacuum cleaner (fig.: 47/48). Please use
household gloves. The fluff can remove easily when
they have been sprayed with water previously.
On this occasion the ventilation slots should be vacu
-
umed also (fig.: 49).
47
48
49
WARNING!
Unplug the machine during cleaning and mainte
-
nance.
Clean the drum
▶
After some operation time, fabric care agents or
calcium contained in the water can form an almost
invisible film on the inside of the drum. Use a damp
cloth and some detergent to remove it (fig.: 51). Do
not use any organic solvent or corrosive agent to
avoid damage to the appliance.
▶
Remove metal parts such as needles, coins, etc.
from the drum which were accidentally dried with
the laundry, because it can cause rusting.
▶
For removing rust stains, use a non-chloride clean
-
er. Note the safety instructions of the cleaning
agent manufacturer!
▶
Do not use any hard objects or steel wool for clean
-
ing.
51
Summary of Contents for HD90-A636
Page 1: ...GB User manual Heat Pump Dryer HD90 A636 ...
Page 33: ...GB 33 ...
Page 34: ...HD90 A636 GB _V07 _082016 ...