EN
1-Safety information
6
WARNING!
Maintenance / cleaning
▶
Clean the lint filter and the condenser fi lter after each pro-
gramme (see CARE AND CLEANING).
▶
Do not use water spray or steam to clean the appliance.
▶
Do not use industrial chemicals to clean the appliance.
▶
Replace a damaged supply cord only by the manufacturer, its ser-
vice agent or similarly qualifi ed persons in order to avoid a hazard.
▶
Do not try to repair the appliance by yourself. In case of repair
please contact our customer service.
Installation
▶
Ensure a location which allows opening the door fully. Do not in-
stall the tumble dryer behind a lockable door, a sliding door or a
door with hinges on the opposite side of the tumble dryer door
as this limits the full opening of the tumble dryer door.
▶
Install the appliance in a well-ventilated, dry place.
▶
Never install the appliance outdoors in a damp place, or in an area
which may be prone to water leaks such as under or near a sink
unit. In the event of a water leak cut power supply and allow the
machine to dry naturally.
▶
Install or use the appliance only where the temperature is above
5 °C.
▶
Do not place the appliance directly on a carpet, or close to a wall
or furniture.
▶
Do not expose the appliance to any frost, heat or direct sunlight
or in the near of heat sources(e.g. stoves, heaters).
▶
Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electri-
cian.
▶
Do not use multi-plug adapters and extension cables.
▶
Make sure not to damage the electric cable and the plug. If dam-
aged have it replaced by an electrician.
▶
Use a separate earthed socket for the power supply which is easy
accessible after installation. The appliance must be earthed.
▶
Only for UK: The appliance’s power cable is fi tted with 3-cord
(grounding) plug that fi ts a standard 3-cord (grounded) socket.
Never cut off or dismount the third pin (grounding). After the ap-
pliance is installed, the plug should be accessible.
