EN
9-Care and cleaning
21
9.3 Empty the water tank
During operation, steam condenses to water which is
collected in the water tank. Empty the water tank after
each drying cycle.
1.
Pull out the water tank from its housing (Fig. 9-9).
2.
Empty the water tank (Fig. 9-10).
3.
Reinstall the water tank to the tumble dryer (Fig.
9-11).
Notice
Do not use the water for any kind of drinking or food processing.
kg
9 A
++
kg
9
++
A
i-REFRESH
Dry Level
Delay
Wrinkle Free
Temp.
Babycare
Quick Dry
Mix
Cotton
Duvet
Synthetics
Towel
Warm Up
Shirt
Wool
Timer
Bulky
Delicate
Sports
Childl ock
i-Re fres h
kg
9 A
++
kg
9
++
A
i-REFRESH
9-9
9-10
9-11
9.4 Tumble dryer
Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do
not use any organic solvent or corrosive agent to avoid damage to the device.
9.5 Drum
After some operation time, fabric care agents or calcium contained in the water
can form an almost invisble fi lm on the inside of the drum. Use a damp cloth and
some detergent to remove it. Do not use any organic solvent or corrosive agent
to avoid damage to the device.
9.5 Evaporator
If the evaporator behind the condenser fi lter is dirty, it can be cleaned by use of
a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.
