4
English
4. Insert the locking screw through the top hole of the coupling, adjust the fan head
to the desired position and firmly tighten screw and the tilt control.
OPERATING INSTRUCTIONS
1. Ensure rotary switch is in the off position (0) and then plug in.
2. Adjust fan speed by moving rotary switch.
0-Off
I-Low
II-Medium
III-High
3. To oscillate fan, press down on control knob at the top of the motor housing. To
stop oscillation, pull up on the same knob.
4. To change the angle of the fan, loosen large tilt control knob and smaller locking
screw, adjust fan head to the desired position and retighten.
5. Use the height adjustment knob to raise or lower the fan as detailed above.
CLEANING
Unplug fan and remove the front guard. Wipe blades with soft damp cloth, taking
care not to alter the angle of the blades. Allow to dry. If necessary, use a soft
brush to remove dust from the guards. Reassemble fan fully before use.
The motor bearings are permanently sealed and do not require additional
lubrication.
