Haier ESA415J, Use And Care Manual

Page: 4 / 24

The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located either on the side or back of the air conditioner
cabinet or behind the front grille.
Specific electrical requirements are listed in the chart below.
Follow the requirements for the type of plug on the power supply
cord.
NOTES:
■
Do not use the power supply cord as an off/on switch.
■
A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
This air conditioner must be grounded. This air conditioner is
equipped with a power supply cord having a 3 prong grounding
plug. The cord must be plugged into a mating, grounded 3 prong
outlet, grounded in accordance with all local codes and
ordinances. If a mating outlet is not available, it is the customer’s
responsibility to have a properly grounded 3 prong outlet installed
by a qualified electrical installer.
It is the customer’s responsibility:
■
To contact a qualified electrical installer.
Electrical Requirements
Recommended Grounding Method
Power Supply Cord
Power Supply
Cord
Wiring Requirements
4
■ 208/230-volt (187 min. to 253 max.)
■ 0 to 12 amps
■
Use on single outlet circuit only.