4
Positioning the appliance
Positioning the appliance in the desired location. The appliance is equipped with water supply and drain
hoses that can be positioned to the right or the left of the appliance to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to level the appliance. If the
appliance is level, it will help to ensure proper performance.
Installation
fig.A
Cold water connection
Connect the water supply hose to a threaded 3/4 inch (ca. 19mm)
connector, making sure that it is fastened tightly in place (see
Fig. A).
If the water pipes are new or have not been used for an extended
period of time, let the water run for a while until the water is clear
and free of impurities.
If this precaution is not taken, there is a risk that the water inlet
can get blocked and damage the appliance.
Anti-Flooding protection
The dishwasher is equipped with a system that stops the supply of water in the event of a problem with
the water supply hose or leaks within the unit, in order to prevent damage to your home. If for any reason
the box containing the electrical components happens to get damaged, turn off the power supply and
unplug the appliance immediately. In order to guarantee that the anti-flooding feature operates properly,
box "A" with the water supply hose must be attached to the water supply tap as shown in Fig. B. If the
length of the hose is not adequate to make a proper connection, the hose must be replaced with one
which is long enough. This hose is available upon request from specialised retailers and approved ser-
vice centres.
fig.B
Warning
The appliance is to be connected to the
mains water using new hose sets. Old
hose sets should not be reused.
en
