5
4
9
R
inse aid
Th
is product makes dishes sparkle and helps them to dry without spotting.
The dispenser is located on the inside panel of the door.
A
dding rinse aid
R
egardless of the type of detergent dispenser installed on your appliance,
you must proceed as indicated below when loading the rinse aid.
To open the dispenser, turn the cap "2" in an anti-clockwise direction and
then pour in the rinse aid, making sure not to overfill. The amount of rinse
aid used for each cycle can be regulated by turning the dose adjustor "3",
located beneath the cap "2", with a screwdriver. There are 6 different settings;
the normal dosage setting is 3.
H
ow to fill the rinse aid container
How to fill the detergent dispenser
H
Important
Correct dosage of rinse aid improves drying. If drops of water remain on the dishes
or spotting occurs, the dosage adjustor should be turned to a higher setting. If the
dishes have white streaks, turn the dosage adjustor to a lower setting.
Detergent
D
etergent specifically intended for use with dishwashers must be used. The
dispenser must be refilled before the start of each wash cycle following the
instructions provided in the "Programme overview". The detergent dispenser
is located on the inside panel of the door.
To open cover "4" on the dispenser, press button "5".
The detergent for the wash cycle should be poured into
compartment"6“.
The detergent for the pre-wash cycle should be poured into
compartment"7".
After the detergent has been placed in the dispenser, close the
cover and press down until it clicks into place.
Notice:
To facilitate closing the cover, remove any excess detergent on the
edges of the dispenser.
2
3
6
7
en
Adding detergent
