26
Service Manual
Model No.DW12-TFE1 DW12-TFE2
Issue
Rev.
9-5. Cancelling or modifying a cycle
A cycle that is underway can be modified if it has only been running for a short time. Otherwise,
the detergent may have already been used, and the appliance may have already drained the
wash water. If this is the case, the detergent dispenser must be refilled ( see the paragraph
entitled, “ Loading the detergent ”).
To modify a cycle that is already underway, follow the instructions contained in the paragraph
entitled "Reset drain function", and select the programme you wish (see the paragraph entitled,
"Switching the dishwasher ON").
9-6. 3 in1 function(DW12-TFE2 series)
When using "3 in 1"combination products, the rinse-aid and salt lights are no longer useful. It may
be helpful to select the lowest possible setting for water hardness.
If you decide to switch to the use of a standard detergent system we advise that you:
Refill both the salt and rinse aid compartments.
Switch the water hardness setting to the highest possible position and run for three normal cycles
without a load.
Readjust the water hardness setting again according to the conditions for your region (For more
information please refer to your instruction manual).
Warning
Do not place the tablets in the tub or the cutlery basket as this will result in poorer wash
results. The tablets should be placed in the detergent doser.
Notice:
The usage of 3 in 1 or similar tablets is forbidden when Heat, Rapid Wash and Soak
programmes are selected.
