25
Service Manual
Model No.DW12-TFE1 DW12-TFE2
Issue
Rev.
9. Turning on the Appliance
9-1. Switching the dishwasher ON
Turn on the tap.
Close the door after loading the appliance.
Set On-Off button to On. The state indicator "A"
light.
Rotate the knob to select programme you wish.
After 3 seconds the
appliance emits a short warning signal, and start
the programme ,the state indicator "A" blinks.
Warning
When the dishwasher power on, the programme which the knob indicated can not be
carried out, you must Rotate the knob to another programme and then back to it.
9-2. End of programme
Six beeps will indicate that the wash cycle has finished and the state indicators "A" light.
9-3. Switching the dishwasher OFF
Several minutes after the programme has ended:
Set On-Off button to Off
Open the door .
Turn the water tap off.
Remove dishes, etc. when they have cooled down.
Notice:
When the appliance is already underway press the button "B" for 3 seconds, all of the
settings will be cancelled.
9-4. Interrupting the programme
Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not
open the door fully until spray arm has stopped rotating.
When you open the door, the buzzer emits 1 short warning signal every 30 seconds...
If the appliance has already heated up or the hot water was switched ON and then the appliance
door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance
door may open due to expansion.
B
A
D
C
F
E
DW12-TFE2 Series
DW12-TFE1 Series
B
A
