Haier AW09TE1VHA, Service Manual

Page: 34 / 79

INSTALLATION PAGE
ENGLISH
Step 1 - Preparation
Required Tools for Installation Procedure for Selecting the Location
detector
Note:
place.
Clearances of Indoor and Outdoor Units and Refrigerant scale
F
A
C
E
D
Floor xing dimensions of the outdoor unit
Fixing of outdoor unit
Fix the unit to concrete or block with bolts
(10mm) securely.
When tting the unit to wall surface, roof or
rooftop, x the unit securely in consideration
of earthquake and strong wind.
If vibration may affect the house, x the unit
by attaching a vibration-proof mat.
The marks from to
in the gure are the
name of the parts.
The distance between
the indoor unit and the
oor should be more
than 6 feet.
The models adopt HFC free refrigerant R410A
more than
4in.
more than 4in.
more than 4in.
more than 4in.
more than
4in.
more than 24in.
more than 6in.
A
G
Arrangement of piping
directions
Rear left
Left
Rear
right
Right
Below
G
Attention must be paid to
the pitch of drain hose
Z
Dimensions(inches)
Model
(Unit: inch)
5 1/2”
5 1/8” 24 3/4”
5 1/8” 14”
5 1/16” 26”
5 1/16” 15 3/4”
5 1/2”
19 5/8” 10 1/16”
1U09TE1VHA
1U12TE1VHA
1U18TE2VHA
1U24TE2VHA
2 1
1 x2
34
To avoid electrical interference,
maintain at least 10 feet of clearance
from the unit and control cable to
televisions and radios.
ma}ture.
Outdoor sections cannot be stacked.
If installing on a roof, install guard rails or
fencing per local code.
Flaring tool suitable for R410-A
of
be paid to
the pitch of drain hose
(Unit: i
Z
Attention
G
piping f f g
directions
Rear left
Rear
Left
right
Right
Below
must t