background image

Commercial Air Conditioner

             Model: AU182AFERA 

AD182AMERA, AS182AVERA 

                   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLEEP Mode

Remote control unit

Air flow adjustment

Swing louvers

(Vertical louvers)

Up and down

Put louvers at up position in cooling and down position in heating mode.

This will be helpful to keep an even room temp.

Note:

In cooling or dry operation, don't put horizontal louvers at downward

position for a long time, or outlet grill might get frosted. Don't expose

your skin to cool or warm air for a long time.

Notice:

Side from side

ON

OFF

TEMP

HEALTH

FAN

MODE

SLEEP

SWING

CLOCK

TIMER

SET

LOCK

LIGHT

RESET

HEAT

(Horizontal louvers)

Side from side

Fixed position

Press the SWING            again to fix the
horizontal louvers at your desired position.

Swing

Press SWING          the horizontal
louvers move from up to down.

Fixed position

Press the SWING            again to fix the
vertical louvers at your desired position.

Swing

Press SWING          the vertical
louvers move from side to side.

2

1

Position 1

Position 2

Position 3

Position 4

Position 5

Position 6

Position 7

Position 8

[COOL/DRY/FA
N/AUTO(COOL)
HAVE NOT]

(AUTO SWING)

Position 1

Position 2

Position 3

Position 4

Position 5

Position 6

Before go to bed, you can press the Sleep button, the air conditioner will operate in comfortable sleep mode to make

your sleep more comfortable.

-38-

Summary of Contents for AD182AMERA



































































































Reviews: