16
Operation
Timer ON/OFF Function
To cancel TIMER mode
Just press TIMER button several times until TIMER mode
disappears.
Hints:
After replacing batteries or a power failure happens,
TIMER
setting should be reset.
Remote controller has memory function.When in TIMER mode next time, just Press SET button after selecting mode if
timer setting is as the same as the previous one.
(4) Confirming timer setting
After setting correct time, press SET button to confirm.
or stops flashing.
Time displayed: Unit starts or stops at x hour x min (TIMER
ON or TIMER OFF)
Timer mode indicator on indoor unit lights up.
ON
OFF
Set Clock correctly before starting Timer operation (refer to
timer instruction). You can let the unit start or stop automatically
at following times: Before you wake up in the morning, or get
back from outside or after you fall asleep at night.
(1) Unit start
After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
(3) Timer setting
Press time adjustment buttons / .
Every time the button is pressed, the time increases by
1min.If the button is kept pressed, the time will change quickly.
Every time the button is pressed, the time decreases by 1 min.
If the button is kept pressed, the time will change quickly.
The time will be shown on LCD.
It can be adjusted within 24 hours.
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCK
LIGHT
RESET
HEAT
POWER/SOFT
2
3
4
1
AM
AM
(2) TIMER mode selection
Press TIMER button to select TIMER mode. Every time
the button is pressed, display changes as follows:
Remote
controller
Select your desired TIMER mode (TIMER ON or TIMER
OFF). or will flash.
ON
OFF
ON
ON
OFF
OFF
TIMER ON TIMER OFF
TIMER ON-OFF
AM
12:00
PM
12:00
PM
12:00
AM
12:00
BLANK
HEALTH AIRFLOW
FRESH
10
o
C
