Haier 50UG6550GC, User Manual

Page: 21 / 71

19
TROUBLESHOOTING
Please make these simple checks before calling service. These tips may save you time and money since charges for
receiver installation and adjustments of customer controls are not covered under your warranty.
w o ll o F o t s n o i t c A d n a k c e h C o t s m e t I s m o t p m y S
“Ghost” or double image This may be caused by obstruction to the antenna due to high rise
buildings or hills. Using a highly directional antenna may improve the
picture.
No power Check if the TV’s AC power cord is plugged into the outlet.
Unplug the TV, wait for 60 seconds. Then reinsert plug into the outlet
and turn on the TV again.
No picture Check antenna connections at the rear of the TV to see if it is properly
connected to the TV.
Possible broadcast station trouble. Try another channel.
Adjust the contrast and brightness settings.
Check the Closed Captions control. Some TEXT modes could block the
screen.
Good picture but no sound Increase the volume level by pressing the
VOL+
button on the remote
control or on the TV side control panel.
Press the
MUTE
Good sound but poor color Adjust the contrast, color and brightness settings.
Poor picture Poor picture quality may occur when an activated S-VHS camera or
camcorder is connected to your TV and other peripherals at the
Snowy picture and noise Check the antenna connection.
Horizontal dotted line This may be caused by electrical interference (e.g. hair dryer, nearby
Television not responding to
remote control Check whether the batteries are working. Replace if necessary.
Clean the remote control sensor lens on the TV.
You can still use the buttons on the side of your TV.
Pixels (dots) that are always
dark or always lit Your TV is precision-manufactured using an extremely high level of
technology. However, sometimes pixels may not display correctly.
These types of occurrences are inherent to this type of product and do
not constitute a defective product.
English